Dear Mr. Ronald Maes,
Nice greetings to you from Mexico.
About graphics size, is important ?? Because SERVRANX tell me must be 23 or 25 centimeters minimum to work with emissors ones, while DAJAFEÉ tell the same, but they offers your big format 14 x 21 cms. but also offers pouche mini version 6 x 10 cms., so it's contradictory. AURELIÉN from etoileverte offers very nice graphics in 14 x 21 cms. single version.
So, size import for emissors ones ??
I believe for recherche planches it will be less important, always have enough space to work and don't be too small.
I bought DAJAFEÉ two big format and mini ones and found poor quality impressions, cheap paper and cheap printed, poor definition and in mini versions not clarity in some letters and phrases...but they told both versions work fine.
That was size topic.
Now, some digital printers produce hot when work....another ones scanners produce light when work, it's bad for the graphics ??
In the ERR 6P device, what size would I use for temp in or corrector to transmit their info ?? or do you think it's not necessary to do it
About PLANCHE MAGNETIQUE CURATIVE and PLANCHE EVALUATION et CONTROL from DAJAFEÉ, both ones are for recherche or also for broadcasting emissors ??
Because I want to buy them also, but they have a little in detail information not enough to be sure about what are buying.
Thanks so much Mr. Ronald Maes for your comments and my best regards,
sincerely, Jxxx, MEXICO.
It is clear that graphiques for research need to be of a comfortable size to work with.
I find no use for a pocket size format as I always work at my desk.
Servranx has published a few books where it is extensively explained how to make graphiques for emission. The lines, shapes, symbols, forms and also size for optimal results are determined by the pendulum.
The emission-graphic is part of the radionic action, but only part. The most important element is the operator with his mental orientation, will and desire at the moment of activation.
Like the pendulum, a radionic-emission-graphic without an operator has no action - it is just a piece of print.
I can only comment on and explain the Servranx materials - I have worked with and used.
your question :
"Now, some digital printers produce hot when work....another ones scanners produce light when work, it's bad for the graphics ??"
your question :
" In the ERR 6P device, what size would I use for temp in or corrector to transmit their info ?? or do you think it's not necessary to do it ??"
------ I do not understand this question